Hey all,
I recently purchased a 1993 Honda Prelude (gen 4). It has been engine and tranny swapped, running a manual H22A1.
Using this website: https://en.wikibooks.org/wiki/Vehicl...onda/VIN_Codes I have worked out this information from the VIN:
Code:
VIN: JHMBA82400C100867
1 [J] = Japan
2 [H] = Honda
3 [M] = Passenger vehicle manufactured in Japan
4, 5, 6 = BA8 = Prelude, 2.2L
7 [2] = 2 door coupe, Auto transmission
8 [4] = either 2.1S Prelude w/ 4WS or S Prelude (92-93)
9 [0] = check digit
10 [0] = ?? (Model Year)
11 [C] = Sayama, Saitama, Japan
This is from the chassis though, which I'm assuming I should use for buying anything non-engine related such as any brakes/suspension/interior parts.
I'm convinced the car still has the original wiring harness, or at least has a harness taken from an automatic H22A1 since it still has the wiring for the automatic shifter.
I'm a little confused as to which Helms manuals to get (both electrical and service/workshop manuals), since the BA8/S and (I assume the BB1/VTi-R) have different years, and different Helms manuals.