Results 1 to 13 of 13
  1. #1
    Junior Member VTIR's Avatar
    Generation
    5th Gen
    Model
    VTEC
    Join Date
    Aug 2013
    Location
    Victoria
    Posts
    28

    what turbo is this?

    hi...just wanna ask some of you turbo guru's,,...
    what turbo is this?...i don't think it's a t25/28..
    and is that a t3 flange? hope it is...cause most of the turbo manifolds ive seen have a t3 flange.
    reason i'm asking is...my friend gave it to me..and i'm planning to put this in my 5th gen..
    not looking at doing internal work, just a daily driver with a bit of turbo power!
    aiming for around 150-160fwkw, would this turbo be enough?
    any help would be appreciated!..thanks in advance....
    Attached Thumbnails Attached Thumbnails photo 1.jpg   photo 3.jpg   photo 5.jpg  

  2. #2
    Senior Member conor07's Avatar
    Generation
    3rd Gen
    Model
    Si 4WS turbobo bro
    Join Date
    Oct 2011
    Location
    Australian Capital Territory
    Posts
    938
    there should be a little plate on the side of the core saying what it is

  3. #3
    Senior Member conor07's Avatar
    Generation
    3rd Gen
    Model
    Si 4WS turbobo bro
    Join Date
    Oct 2011
    Location
    Australian Capital Territory
    Posts
    938
    actually it might be a t25 off a pulsar

  4. #4
    PA Janitor Bob's Avatar
    Generation
    3rd Gen
    Model
    Si 4WS - B Spec
    Join Date
    Jan 2006
    Location
    Western Australia
    Posts
    11,090
    Did you ask your friend what it was and where it came from?

  5. #5
    Silver Member PJF_Lude's Avatar
    Generation
    3rd Gen
    Model
    Si4ws Turbo
    Join Date
    May 2003
    Location
    Queensland
    Posts
    1,860
    looks to be a small T25
    Flanges are easy enough to change if you know someone who can weld, or you can use an adaptor
    ~Ian~

    Anything thing I say is my opinion, all care, but no responsibility taken.

    1989 Prelude Si Turbo - Laguna gold - Progress thread index or My Garage
    Prelude Australia POTM - June 2009 ..... Prelude Power POTM - July 2010
    2006 CBR1000RR - Silver Metallic - Clicky

  6. #6
    Junior Member VTIR's Avatar
    Generation
    5th Gen
    Model
    VTEC
    Join Date
    Aug 2013
    Location
    Victoria
    Posts
    28
    Hope this helps
    Attached Thumbnails Attached Thumbnails image.jpg  

  7. #7
    Regular Member manolii's Avatar
    Generation
    5th Gen
    Model
    ATTS
    Join Date
    Mar 2011
    Location
    Queensland
    Posts
    348
    Quote Originally Posted by VTIR View Post
    Hope this helps
    Have you tried doing a Google search of Garrett 14411-24U00

    http://www.dorikaze.net/showthread.p...urbo-%28780%29
    Quote Originally Posted by Kozman91 View Post
    I didn't choose the lude life, it choose me
    Quote Originally Posted by AdReNaLiN View Post
    If it's got wheels or floats, if its got tits or wings, it's only ever going to cost more money.

  8. #8
    Junior Member VTIR's Avatar
    Generation
    5th Gen
    Model
    VTEC
    Join Date
    Aug 2013
    Location
    Victoria
    Posts
    28
    it's identical to r32 gtr turbo, but serial is different..
    anyway...if it is a r32 turbo, how much ps is it rated at?
    thanks

  9. #9
    QLD Administrator AdReNaLiN's Avatar
    Generation
    4th Gen
    Model
    Si 4ws
    Join Date
    May 2003
    Location
    Queensland
    Posts
    4,083
    Looks too small and restrictive for a H series motor...
    You should buy my old turbo setup - it's for sale and will bolt straight on.

  10. #10
    Junior Member VTIR's Avatar
    Generation
    5th Gen
    Model
    VTEC
    Join Date
    Aug 2013
    Location
    Victoria
    Posts
    28
    how much r u willing to sell the kit for?...and u willing to sell seperate parts?..or the whole kit?...
    anyway...i know what turbo this is now...it's off a BNR32 & R33 (14411-24U00), rate at 450ps..that should be more than enough, well for what i'm aiming for anyway!
    thanks foe the help guys! appreciate it

  11. #11
    Silver Member PJF_Lude's Avatar
    Generation
    3rd Gen
    Model
    Si4ws Turbo
    Join Date
    May 2003
    Location
    Queensland
    Posts
    1,860
    if it's a GTR turbo, then you can bet that the 450ps rating is for a pair of them on a 2.6l engine.
    GTR turbo's have a T25 turbine and likely wont flow enough for your 2.2 in a single turbo configuration. You will get a nice power boost in your midrange, but you'll be strangling it at high rpm, and you may lose power in vtak.
    ~Ian~

    Anything thing I say is my opinion, all care, but no responsibility taken.

    1989 Prelude Si Turbo - Laguna gold - Progress thread index or My Garage
    Prelude Australia POTM - June 2009 ..... Prelude Power POTM - July 2010
    2006 CBR1000RR - Silver Metallic - Clicky

  12. #12
    Senior Member conor07's Avatar
    Generation
    3rd Gen
    Model
    Si 4WS turbobo bro
    Join Date
    Oct 2011
    Location
    Australian Capital Territory
    Posts
    938
    Quote Originally Posted by PJF_Lude View Post
    if it's a GTR turbo, then you can bet that the 450ps rating is for a pair of them on a 2.6l engine.

    beat me to it

  13. #13
    Junior Member VTIR's Avatar
    Generation
    5th Gen
    Model
    VTEC
    Join Date
    Aug 2013
    Location
    Victoria
    Posts
    28
    righty then...i guess i'll have to find some thing else..i'll probably sell it then!
    thanks for you input...appreciate it!

Similar Threads

  1. Turbo or N/A
    By follar99 in forum Chit-Chat
    Replies: 45
    Last Post: 11th April 2009, 10:13 PM
  2. Turbo Manifold And Turbo
    By G_Loc in forum Boost
    Replies: 16
    Last Post: 20th January 2003, 09:32 AM
  3. Turbo
    By UrAverageLuder in forum Fourth Generation
    Replies: 2
    Last Post: 26th November 2002, 03:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •