Results 1 to 5 of 5
  1. #1
    Junior Member
    Generation
    4th Gen
    Join Date
    Jan 2010
    Location
    South Australia
    Posts
    115

    Prelude 97si 4 stud brake rotor =92-96 prelude brake rotor?

    Hi all.

    Recently i need to replace my rotor but i cant find any info about the rotor size?
    All i know is 4x114 same as 4th gen prelude.

    Can anyone confirm if Prelude 97si 4 stud brake rotor =92-96 prelude brake rotor?

    Cheez

  2. #2
    PA Janitor Bob's Avatar
    Generation
    3rd Gen
    Model
    Si 4WS - B Spec
    Join Date
    Jan 2006
    Location
    Western Australia
    Posts
    11,090
    Keep in mind the 4th gen rotors come in 2 sizes.
    282mm on the Vtir
    260mm on the S and Si.

    I believe the 4th gen 260mm 4x114.3 rotor is the same as the 5th gen Si 4x114.3.
    Brembo are listing them as the same part numbers.

  3. #3
    Silver Member diMii's Avatar
    Generation
    4th Gen
    Model
    VTEC
    Join Date
    Oct 2008
    Location
    --Australia--
    Posts
    1,326
    yes bobs right, they are the same

  4. #4
    Junior Member
    Generation
    4th Gen
    Join Date
    Jan 2010
    Location
    South Australia
    Posts
    115
    Thz for the quicknreply!
    But the rear is 260mm as well as front?

    So if i get the 4th gen prelude si rotor i would be fine right?

    Quote Originally Posted by Bob View Post
    Keep in mind the 4th gen rotors come in 2 sizes.
    282mm on the Vtir
    260mm on the S and Si.

    I believe the 4th gen 260mm 4x114.3 rotor is the same as the 5th gen Si 4x114.3.
    Brembo are listing them as the same part numbers.
    Last edited by altong0840; 2nd November 2013 at 12:16 PM.

  5. #5
    PA Janitor Bob's Avatar
    Generation
    3rd Gen
    Model
    Si 4WS - B Spec
    Join Date
    Jan 2006
    Location
    Western Australia
    Posts
    11,090
    Rear rotors
    All the rear rotors on the 4th and 5th gens are the same. Regardless of model. All 260mm, but non ventilated at 10mm thick.

    Front rotors
    In 4x114.3 PCD, you have the 260mm x 23mm for the 4th gen S and Si and also the 5th gen Si.

    Then there is the 4x114.3 PDC, 282mm x 23mm for the 4th gen Vtir.

    And the 5x114.3 PDC, 282mm x 23mm for the 5th gen Vtir.

    Savvy?

Similar Threads

  1. Brake Rotor Issues
    By T-Marley in forum Fourth Generation
    Replies: 6
    Last Post: 1st October 2005, 03:20 AM
  2. Brake rotor vendor
    By kobiwan in forum Fifth Generation
    Replies: 1
    Last Post: 14th April 2005, 12:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •