Page 1 of 204 1231151101 ... LastLast
Results 1 to 15 of 3058
  1. #1
    Gold Member phattzy's Avatar
    Generation
    3rd Gen
    Model
    si 4ws TURBO
    Join Date
    May 2009
    Location
    Queensland
    Posts
    2,981

    turbo 3rd gen lude

    this is my baby . been 7 years so far and cant remember how much ? its in the shop at the moment getting head work forged rods and custom dish pistons as the stockos didnt like 10psi . its a 89 (built88) gen3 lude , stock block , bore , crank . scat h22 forged h-beam rods , custom je dish pistons 8.5:1 C/R , head port polished , heavier valve springs , cometic 5 layer 0.050" MLS head gasket , custom hi vol fuel rail , bosch 1680cc indy blue injectors , walbro 255lh internal pump , bosch 044 external pump , 3ltr surge tank , sard fpr , turbo smart 38mm waste gate ( 14psi spring ) , type3 supersonic bov , eboost2 , turbonetics gtk450 turbo , modifed intake ( x2 spacer plates ) , 2.5"hot pipe - 3"cold pipe , 800/400/75 FMIC , adaptronics e420c ecu , topgun 8.8mm pro-race series leads , stage 3 f1 button clutch , 5 speed , 17rims , sleeve kit (+4 , -4 ) custom steam pipe turbo manifold , 3" full stainless system , magnaflow hi-flow cat , battery relocted in boot , twin 10" thermo fans , accord side skirts , modd'd aftermaket front bar .





    ]
    Last edited by phattzy; 26th October 2011 at 05:58 PM.

  2. #2
    PA Resident SAKI's Avatar
    Generation
    4th Gen
    Model
    Si
    Join Date
    May 2006
    Location
    New South Wales
    Posts
    3,987
    Hey mate, welcome to PA Can't say i'm a fan of the... colour scheme? But hey, if you like it go for it

    I guess a manual conversion is next on the list?
    Quote Originally Posted by brash22 View Post
    You sir are mad. Like lock you in the nuthouse mad.
    Quote Originally Posted by Manabir View Post
    You sir are a prelude obsessed freak.
    Quote Originally Posted by hiru View Post
    you sir, are a prelunatic.

  3. #3
    PA Resident Flipmods's Avatar
    Join Date
    Nov 2003
    Location
    New South Wales
    Posts
    3,513
    Nice engine work. I must say a B20 Turbo setup works very well and I regret letting mine go, I definately want to go the turbo route again.

    BRING BACK THE FORUMS!

  4. #4
    Regular Member ELUDED's Avatar
    Generation
    4th Gen
    Model
    S
    Join Date
    Jul 2008
    Location
    New South Wales
    Posts
    300
    massive turbo!!!??!?!!

    what is it a T04E?

    nice car looks ghetto
    mmmmm vtec

  5. #5
    PA Resident SAKI's Avatar
    Generation
    4th Gen
    Model
    Si
    Join Date
    May 2006
    Location
    New South Wales
    Posts
    3,987
    Quote Originally Posted by phattzy View Post
    turbonetics gtk450 turbo
    It is a ^^
    Quote Originally Posted by brash22 View Post
    You sir are mad. Like lock you in the nuthouse mad.
    Quote Originally Posted by Manabir View Post
    You sir are a prelude obsessed freak.
    Quote Originally Posted by hiru View Post
    you sir, are a prelunatic.

  6. #6
    Gold Member phattzy's Avatar
    Generation
    3rd Gen
    Model
    si 4ws TURBO
    Join Date
    May 2009
    Location
    Queensland
    Posts
    2,981
    Quote Originally Posted by SAKI View Post
    Hey mate, welcome to PA Can't say i'm a fan of the... colour scheme? But hey, if you like it go for it

    I guess a manual conversion is next on the list?
    na im not a fan either getting paint when head gets back from shop . keeping auto for as long as possible have stally 3200 trying to find lsd for it . cheers for that

    Quote Originally Posted by Flipmods View Post
    Nice engine work. I must say a B20 Turbo setup works very well and I regret letting mine go, I definately want to go the turbo route again.
    yeah all i can say is do ya homework and have a good engine builder who knows a bit . you get stupid power out of them aswell ,

    Quote Originally Posted by ELUDED View Post
    massive turbo!!!??!?!!

    what is it a T04E?

    nice car looks ghetto
    t3 i think ? its a turbonetics gtk450 rated 500+hp , bit of lag but we'll sort it

  7. #7
    PA Resident SAKI's Avatar
    Generation
    4th Gen
    Model
    Si
    Join Date
    May 2006
    Location
    New South Wales
    Posts
    3,987
    Quote Originally Posted by phattzy View Post
    yeah all i can say is do ya homework and have a good engine builder who knows a bit . you get stupid power out of them aswell ,
    Hehe Flipmods pretty much IS homework, he's a switched on dude
    Quote Originally Posted by brash22 View Post
    You sir are mad. Like lock you in the nuthouse mad.
    Quote Originally Posted by Manabir View Post
    You sir are a prelude obsessed freak.
    Quote Originally Posted by hiru View Post
    you sir, are a prelunatic.

  8. #8
    Gold Member phattzy's Avatar
    Generation
    3rd Gen
    Model
    si 4ws TURBO
    Join Date
    May 2009
    Location
    Queensland
    Posts
    2,981
    Quote Originally Posted by SAKI View Post
    Hehe Flipmods pretty much IS homework, he's a switched on dude
    sweet i know who to go to then when things go pear shaped haha

    here are some more pics anyone have pics of there upload them for all to see .does anyone know when some one is organizing a cruise / dyno day in qld ?


  9. #9
    JDM fanatic !JonZap!'s Avatar
    Generation
    4th Gen
    Model
    Flying Broomstick
    Join Date
    Oct 2005
    Location
    Victoria
    Posts
    2,686
    credit for the turbo but that car is asking to be defected
    Imitation is the best form of flattery

  10. #10
    PA Resident Flipmods's Avatar
    Join Date
    Nov 2003
    Location
    New South Wales
    Posts
    3,513
    Nice setup, Turbo is massive suited for the strip rather than street so Lag is expected.
    Non turbo related tip is while your head is off you should re-route your power steering hose from above the manifold to the rear of engine like newer honda cars, cause it will blow soon due to heat and best fix it while the head is off.

    All the best with it, hope you have really sticky tyres or else it is a waste

    BRING BACK THE FORUMS!

  11. #11
    PA Janitor Bob's Avatar
    Generation
    3rd Gen
    Model
    Si 4WS - B Spec
    Join Date
    Jan 2006
    Location
    Western Australia
    Posts
    11,090
    What's got me impressed is that its a turbo charged auto.
    Any transmission issues yet?
    How many kays have you got on the turbo setup and that transmission?

  12. #12
    Silver Member Ashwee's Avatar
    Generation
    Other Honda
    Join Date
    Jan 2007
    Location
    Victoria
    Posts
    1,373
    Pretty impressive setup there, I'm also impressed the auto has lasted you, mine can't really handle 70kw of fury
    Apostrophes for plurals, Ashwee says no.

  13. #13
    Gold Member phattzy's Avatar
    Generation
    3rd Gen
    Model
    si 4ws TURBO
    Join Date
    May 2009
    Location
    Queensland
    Posts
    2,981
    Quote Originally Posted by !JonZap! View Post
    credit for the turbo but that car is asking to be defected
    yeah true to that BUT . already had them pull me up a simple mod plate and no more tickets but plenty of them pulling me over to try . the auto is still fine have dominator building a stally 3200 , have only run 10psi so far , see what 22psi does ? dont like my chances of it lasting haha . mabe then i might put a manual but i have a spare auto that im going to pull apart and tuffen up , really want the auto but if all else fails manual it is


    GARAGE : http://www.preludeaustralia.com/foru..._vehicle&id=30

    BUILD THREAD : http://www.preludeaustralia.com/foru...o-3rd-gen-lude

    VIDEOS

    http://www.youtube.com/watch?v=usazsV_c_zU
    http://www.youtube.com/watch?v=psgNZjLqRrw
    http://www.youtube.com/watch?v=BRn-1Oeashw

    Quote Originally Posted by SAKI View Post
    PS: Can't wait to see your beast in action.. going to be one the highest power 3rd gens out there i reckon..
    Quote Originally Posted by Pacman View Post
    I am going down now to show them mine....

  14. #14
    Senior Member phantomgrey's Avatar
    Generation
    4th Gen
    Model
    Si 4ws
    Join Date
    Mar 2007
    Location
    Queensland
    Posts
    598
    wow good on ya for doing this, espesially with the auto.
    The tranny cooler wont be staying on the outside of the bumper will it?
    its not the speed that hurts......Its the sudden stop......

  15. #15
    PA Resident SAKI's Avatar
    Generation
    4th Gen
    Model
    Si
    Join Date
    May 2006
    Location
    New South Wales
    Posts
    3,987
    This wouldn't happen to be your car as of about 3-4 years ago?
    Quote Originally Posted by brash22 View Post
    You sir are mad. Like lock you in the nuthouse mad.
    Quote Originally Posted by Manabir View Post
    You sir are a prelude obsessed freak.
    Quote Originally Posted by hiru View Post
    you sir, are a prelunatic.

Similar Threads

  1. 4th gen interior into 3rd gen..
    By aznkim in forum Third Generation
    Replies: 69
    Last Post: 21st September 2009, 10:17 PM
  2. is this a 3rd gen???
    By torell in forum Third Generation
    Replies: 18
    Last Post: 9th September 2007, 09:35 PM
  3. Turbo H22A 3rd gen!!
    By pg_vtec in forum Boost
    Replies: 14
    Last Post: 25th September 2006, 12:12 PM
  4. 3rd Gen VS 4th Gen (Battle of the P Platers)
    By !JonZap! in forum 4th gen
    Replies: 56
    Last Post: 22nd July 2006, 11:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •