Page 1 of 2 12 LastLast
Results 1 to 15 of 17
  1. #1
    Gold Member JSpec's Avatar
    Generation
    4th Gen
    Model
    Si-Vtec
    Join Date
    Aug 2006
    Location
    Queensland
    Posts
    3,054

    Fog Light Wiring

    Ok to start off this forum I thought I'd show some pics and explainations of the fog light sub-harness.

    Here is where you might find the plug under the dash. Either up the top behind the 2 black relays or at the top right where the blue tape is. It comes straight out of a huge loom of wires. I have circled the plug and arrows pointing to the blue tape and relays.


    Also this is the sub harness used for the fog lights, note the colour of the wires. Also the plug shape.

    Last edited by JSpec; 17th September 2008 at 10:51 PM.
    Want to see my car? Click here!
    ....................

  2. #2
    Junior Member fusionprelude's Avatar
    Generation
    2nd Gen
    Model
    Si
    Join Date
    Nov 2006
    Location
    Queensland
    Posts
    82
    hmmm does the 92 bb2 hav this???

    impulse_customz@hotmail.com www.fusioncaraudio.com
    fs maybe... 87 ba3 a20a si lude project car pm me for details...

  3. #3
    Gold Member JSpec's Avatar
    Generation
    4th Gen
    Model
    Si-Vtec
    Join Date
    Aug 2006
    Location
    Queensland
    Posts
    3,054
    you will have the wiring harness in your car but not the little sub-harness or relay or switch for fogs.
    Want to see my car? Click here!
    ....................

  4. #4
    Senior Member rez's Avatar
    Generation
    4th Gen
    Join Date
    Oct 2006
    Location
    Victoria
    Posts
    800
    Anyone got a spare sub-harness btw?

  5. #5
    Gold Member JSpec's Avatar
    Generation
    4th Gen
    Model
    Si-Vtec
    Join Date
    Aug 2006
    Location
    Queensland
    Posts
    3,054
    skinnyboy might. send him a pm..
    Want to see my car? Click here!
    ....................

  6. #6
    J "The Stig" B 94vtirozguy's Avatar
    Generation
    4th Gen
    Model
    VTEC
    Join Date
    Sep 2005
    Location
    Victoria
    Posts
    2,982
    make one.. it takes about 15 minutes

  7. #7
    Junior Member
    Generation
    4th Generation
    Join Date
    Jun 2006
    Location
    Victoria
    Posts
    86
    hi, regarding the wireharness - where does the relay plug into?

    would you possibly have pictures?

    Im having issues installing my fog lights - thread in Fourth Generation

  8. #8
    Gold Member JSpec's Avatar
    Generation
    4th Gen
    Model
    Si-Vtec
    Join Date
    Aug 2006
    Location
    Queensland
    Posts
    3,054
    Quote Originally Posted by aiYa989 View Post
    hi, regarding the wireharness - where does the relay plug into?

    would you possibly have pictures?

    Im having issues installing my fog lights - thread in Fourth Generation
    There are pictures in my 1st post. It's the black little box in them attached to the sub-harness.
    Want to see my car? Click here!
    ....................

  9. #9
    PA Resident Flipmods's Avatar
    Join Date
    Nov 2003
    Location
    New South Wales
    Posts
    3,513
    Good stuff, I think aiYa989 is lost to where to find the plug in your pic, it's a bit hard to notice what you are refering to to the untrained eye. Best to highlight it on the pic.

    BRING BACK THE FORUMS!

  10. #10
    Gold Member JSpec's Avatar
    Generation
    4th Gen
    Model
    Si-Vtec
    Join Date
    Aug 2006
    Location
    Queensland
    Posts
    3,054
    yeah I know but this was back in January lol. Do I need to take a better pic?
    Want to see my car? Click here!
    ....................

  11. #11
    PA Resident Flipmods's Avatar
    Join Date
    Nov 2003
    Location
    New South Wales
    Posts
    3,513
    yeah old post , just trying to help out the new guys trying this mod

    BRING BACK THE FORUMS!

  12. #12
    Gold Member JSpec's Avatar
    Generation
    4th Gen
    Model
    Si-Vtec
    Join Date
    Aug 2006
    Location
    Queensland
    Posts
    3,054
    Fixed
    Want to see my car? Click here!
    ....................

  13. #13
    Regular Member KactuS's Avatar
    Generation
    4th Gen
    Model
    VTEC
    Join Date
    Nov 2007
    Location
    Victoria
    Posts
    159
    Could someone help me please?

    I've installed everything (fogs, switch, sub-harness) for the foglights but they don't work.

    I have a 1995 AUDM 4th gen. The switch fits in the center console just next to the center compartment. The sub-harness is connected to a plug under the dash that was covered in blue tape. The foglights are connected to the plugs that were blue taped to the indicator light wires.

    Is there a fuse that needs to be checked? If so what type of fuse is it and where exactly in the fuse box is it located?

    If its just that the bulbs are burnt out. What type of bulbs do they take and can I replace them without having to take the whole front bumper off?

    Thanks in advance if you can help.

  14. #14

  15. #15
    JDM fanatic !JonZap!'s Avatar
    Generation
    4th Gen
    Model
    Flying Broomstick
    Join Date
    Oct 2005
    Location
    Victoria
    Posts
    2,686
    Imitation is the best form of flattery

Similar Threads

  1. Fog light wiring?
    By JSpec in forum Fourth Generation
    Replies: 31
    Last Post: 10th April 2008, 06:53 PM
  2. Fog Light Wiring ???
    By roninbarnes in forum Third Generation
    Replies: 13
    Last Post: 6th November 2006, 07:07 PM
  3. 1997-2001 (5th Gen) H1 Bulb Comparison And General Information
    By gerhard in forum General Prelude Discussion
    Replies: 0
    Last Post: 9th February 2005, 12:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •