View Full Version : Koni / Eibach Setup

19th May 2007, 01:06 PM
Sorted thank you

19th May 2007, 01:34 PM
might be better to take photo of what you mean.

19th May 2007, 02:32 PM
photo added thanks guys

19th May 2007, 02:37 PM
It sorta looks like you've got the spring up side down...

19th May 2007, 02:58 PM
the weight of the car will push it in place.....

19th May 2007, 03:03 PM
the metal ring you have at the top, actutually sits on the shock at the bottom of the spring.

what holds the ring in place is the circlip for height adjustment. The spring then sits on top of the ring

you should not be grinding anything

19th May 2007, 03:08 PM
yeah i understand that

but the collar doest sit flush with the spring
and a suspension place said they dont fit with eachother

19th May 2007, 03:19 PM
they fit well enough, once the car weight is on it it wont move

19th May 2007, 04:41 PM
the thing is , it fits fine in the springs i have in there now

the eibachs seem skinnier

19th May 2007, 06:35 PM
just make sure you have the springs for the front on the front.

the front springs are the shorter of the two.